Services Provided

Generator Inspection and Service

Routine maintenance is a must to keep your equipment up and running, and make sure you have power when you need it.  Follow the links below to learn more about the following services:

​

• Generator 100 point Inspection

• Generator Service (recommended annually)

Load Bank Testing

Perform a load bank test in accordance with NFPA 110 and manufacturer's recommendations.  Total duration of procedure is dependent on testing time and required set up and tear down time plus performing the actual test itself.  Typically a 2 hour test takes about 4 hours to complete, start to finish.

​

1. 2 hour load bank tests (meets NFPA 110 annual testing requirements).

2. 4 hour load bank tests (meets NFPA 110 36 month testing requirements).

3. 12 hour load bank tests (meets most acceptance testing requirements).

​

Fluid Sampling

Perform the following sampling services at regularly scheduled intervals:​

​

• Oil Sampling

• Fuel Sampling

• Coolant Sampling

Transfer Switch Testing and Maintenance

We provide a complete lineup of transfer switch service and maintenance.

• Transfer Switch Maintenance during Generator Inspection and Service

• 30 Minute and Four Hour Transfer Tests

• Transfer Switch Maintenance

Additional Testing Services

In addition to the services listed above, we also offer the following services for a more robust preventive maintenance program or to assist in any troubleshooting or diagnostic to help troubleshoot issues with your equipment or to ensure proper operation.

​

• Meghometer Testing

• Thermal Imaging Scans

• Vibration Analysis